Preparation of modified polymer blend and electrical performance

In this study, a modified binary polymer blend made up of polycarbonate and polystyrene blend has been prepared by loading of aluminum oxide (Al₂O₃) as a dopant. The role of alumina with polymer blend system was addressed in view of interfacing criteria. The filler concentration of modified blend was taken as 5, 10, and 15%. The morphological, thermal, and electrical properties were characterized by various techniques. Optical microscopy confirms the homogenous dispersion of Al₂O₃ in blend. The presence of alumina was detected by subatomic level using atomic force microscope (both two and three dimensional approach). The differential scanning calorimetric thermographs demonstrate decreasing softing point as function of alumina loading. The dielectric properties such as dielectric constant, loss, and electrical modulus were studied under DC bias. The effect of DC bias exhibits significant changes at low amount of Al₂O₃. The dielectric polarization supports Maxwell Wagner (MW) theory due to low frequency response. 15% Al₂O₃ gives the highest dielectric constant (ε′) value (3.5?×?10⁵) at 10 Hz. The polymer modified blend with Al₂O₃ may be used as a one of the best dielectric medium.     

Low Dielectric Thermoset from Redistributed Poly(phenylene oxide)

A curable low-molecular-weight poly(phenylene oxide) (PPO) was prepared by the redistribution of regular PPO with bisphenol-A (BPA) followed by etherification of the redistributed-PPO (BPA-PPO) with N,N-diallyl-2-chloroacetamide. The redistributed-PPO with allyl group (AL-PPO) was characterized by proton nuclear magnetic resonance, and Fourier transform infrared spectroscopy. The AL-PPO oligomers with reactive double bounds were cured with triallylisocyanurate (TAIC) and/or phosphorus-containing allyl-functionalized monomer (allyl-DOPO). The glass transition temperatures were measured by dynamic mechanical analysis (DMA). Electrical properties of cured resins were studied using dielectric analyzer (DEA). The flame retardancy was determined by a UL-94 vertical test. The effects of curing accelerator, amount of TAIC and allyl-DOPO incorporated into the network on the glass transition temperatures, dielectric properties, and flame retardancy of the resulting systems were investigated. The results indicated that AL-PPO cured with TAIC exhibited high glass-transition temperature (162–198°C), low dielectric constants (2.36–2.57 at 1 GHz) and dissipation factors (0.0039–0.0043 at 1 GHz). The AL-PPO/TAIC copolymerized with allyl-DOPO could achieve a flame retardancy rating of UL-94 V-0 at about 1.35% phosphorus content. The AL-PPO/TAIC resins have potential applications in the fabrication of printed circuit board.     

Effect of biaxial orientation on dielectric and breakdown properties of poly(ethylene terephthalate)/poly(vinylidene fluoride‐co‐tetrafluoroethylene) multilayer films

Polymer films with enhanced dielectric and breakdown properties are essential for the production of high energy density polymer film capacitors. By capitalizing on the synergistic effects of forced assembly nanolayer coextrusion and biaxial orientation, polymer multilayer films using poly(ethylene terephthalate) (PET) and a poly(vinylidene fluoride‐co‐tetrafluoroethylene) [P(VDF‐TFE)] copolymer were produced. These films exhibited breakdown fields, under a divergent field using needle/plane electrodes, as high as 1000 kV mm^?1. The energy densities of these same materials, under a uniform electric field measured using plane/plane electrodes, were as high as 16 J cm^?3. The confined morphologies of both PET and P(VDF‐TFE) were correlated to the observed breakdown properties and damage zones. On‐edge P(VDF‐TFE) crystals induced from solid‐state biaxial stretching enhanced the effective P(VDF‐TFE) layer dielectric constant and therefore increased the dielectric contrast between the PET and P(VDF‐TFE) layers. This resulted in additional charge buildup at the layer interface producing larger tree diameters and branches and ultimately increasing the breakdown and energy storage properties. In addition to energy storage and breakdown properties, the hysteresis behavior of these materials was also evaluated. By varying the morphology of the P(VDF‐TFE) layer, the low‐field dielectric loss (or ion migration behavior) could be manipulated, which in turn also changed the observed hysteresis behavior. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 882–896     

Enhanced mobility and environmental stability in all organic field‐effect transistors: The role of high dipole moment solvent

Low‐operating voltage, high mobility, and stable organic field‐effect transistors (OFETs) using polymeric dielectrics such as pristine poly(4‐vinyl phenol) (PVP) and poly(methyl methacrylate) (PMMA), dissolved in solvents of high dipole moment, have been achieved. High dipole moment solvents such as propylene carbonate and dimethyl sulfoxide used for dissolving the polymer dielectric enhance the charge carrier mobilities by three orders of magnitude in pentacene OFETs compared with low dipole moment solvents. Fast switching circuits with patterned gate PVP‐based pentacene OFETs demonstrated a switching frequency of 75 kHz at input voltages of |5 V|. The frequency response of the OFETs is attributed to a high degree of dipolar‐order in dielectric films obtained from high‐polarity solvents and the resulting energetically ordered landscape for transport. Remarkably, these pentacene‐based OFETs exhibited high stability under bias stress and in air with negligible shifts in the threshold voltage. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1533–1542     

Synthesis of fluorinated polybenzoxazoles with low dielectric constants

Two fluorinated aromatic bis(o‐aminophenol)s, 1,1‐bis(3′‐amino‐4′‐hydroxyphenyl)‐1‐(3′‐trifluoromethylphenyl)‐2,2,2‐trifluoroethane (6FAP) and 1,1‐bis(3′‐amino‐4′‐hydroxyphenyl)‐1‐(3′,5′‐ditrifluoromethylphenyl)‐2,2,2‐trifluoroethane (9FAP) were synthesized, which were allowed to polycondense with aromatic diacyl chlorides to afford the fluorinated aromatic polybenzoxazoles (PBOs) via a conventional two‐step procedure in which the low‐temperature solution polycondensation process was first performed to yield poly(o‐hydroxyamide)s (PHAs) followed by the thermal cyclodehydration to give the PBOs. Experimental results indicated that the PHAs had inherent viscosities in the range of 0.29–0.68 dL/g, showing excellent solubility in organic solvents. The PHAs could be thermally cyclodehydrated into the corresponding PBOs at 260–370 °C. The obtained PBOs exhibited enhanced glass‐transition temperature but decreased solubility with respect to the PHAs. The PBOs showed glass‐transition temperatures in the range of 315–337 °C and excellent thermal stabilities with 5% original weight‐loss temperatures (T₅) of >513 °C. Additionally, the PBO films had average refractive index of 1.5298–1.5656, birefringence of 0.0051–0.0092, and low dielectric constants of 2.57–2.70. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Novel soluble fluorinated poly(ether imide)s with different pendant groups: Synthesis,thermal, dielectric,and optical properties

Three types of new bis(ether dianhydride) monomers, [4,4′‐(2‐(3′‐methylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4a)], [4,4′‐(2‐(3′‐trifluoromethylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4b)], and [4,4′‐(2‐(3′,5′‐ditrifluoromethylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4c)] were prepared via a multistep reaction sequence. Three series of soluble poly(ether imide)s (PEIs) were prepared from the obtained dianhydrides by a two‐step chemical imidization method. Experimental results indicated that all the PEIs had glass transition temperature in the range of 200–230 °C and the temperature of 5% weight loss in the range of 520–590 °C under nitrogen. The PEIs showed excellent solubility in a variety of organic solvents due to introduction of the bulky pendant groups and were capable of forming tough films. The casting films of PEIs (80–91 μm in thickness) had tensile strengths in the range from 88 to 117 MPa, tensile modulus from 2.14 to 2.47 GPa, and elongation at break from 15 to 27%. The casting films showed UV‐Vis absorption edges at 357–377 nm, low dielectric constants of 2.73–2.82, and water uptakes lower than 0.66 wt %. The spin‐coated films of PEIs presented a minimum birefringence value as low as 0.0122 at 650 nm and low optical absorption at the optical communication wavelengths of 1310 and 1550 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3281–3289, 2010     

Preparation of phosphinated bisphenol from acid‐fragmentation of 1,1,1‐tris(4‐hydroxyphenyl)ethane and its application in high‐performance cyanate esters

We reveal a route for the preparation of phosphinated bisphenol, 1,1‐bis(4‐hydroxyphenyl)‐1‐(6‐oxido‐6H‐dibenz <c,e> <1,2> oxaphosphorin‐6‐yl)ethane (2) , via a one‐pot reaction of 1,1,1‐tris(4‐hydroxyphenyl)ethane and 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide (DOPO) in the catalysis of p‐toluenesulfonic acid. A two‐step reaction mechanism, acid‐fragmentation of 1,1,1‐tris(4‐hydroxyphenyl)ethane followed by nucleophilic addition of DOPO, is proposed for the synthesis. Based on (2) , a dicyanate ester derivative, 1,1‐bis(4‐cyanatophenyl)‐1‐(6‐oxido‐6H‐dibenz <c,e> <1,2> oxaphosphorin‐6‐yl)ethane (3) was prepared and co‐cured with a commercially available dicyanate ester, the dicyanate ester of bisphenol A (BACY). Experimental data show that incorporating (3) into BACY enhances the flame retardancy and dielectric properties with little penalty to the thermal properties. A thermoset with T_g 274 °C, coefficient of thermal expansion (CTE) 49 ppm/°C, D_k 3.04 (1 GHz), T_d (5%,) N₂: 435 °C, air: 424 °C, and UL‐94 V‐0 rating can be achieved via this approach. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

A new representation of permittivity versus temperature for alkanols of the same chain length

The alkanols of three carbon length have been studied by dielectric methods during many years and they do not obey any theoretical model. These substances have the same chain length and have one, two or three dipoles per molecule, so their ability to form hydrogen bridges changes from one substance to other, and one can obtain information by comparative studies. In previous works, we have measured the thermal dependence of permittivity of these substances and analysed the results with an empirical modification of the Onsager equation. Now we shall analyse and compare the results using a different representation. In this representation, the data shows straight lines, whose slopes depend on the quantity of dipoles of each molecule encouraging the high quality of the fittings obtained with the three substances, and also that they behave in the same dielectric way with the rise of temperature.     

A possible interpretation of CDF dijet mass anomaly and its realization in supersymmetry

Recently, the CDF Collaboration reports an anomaly in dijet mass distribution in association with a lepton and missing energy. We discuss a possibility that the origin of the lepton and missing energy comes not from a W boson but a new boson particle, which is also responsible for the dijet mass peak. We show that such a situation can be realized in the framework of the minimal supersymmetric standard model and the dijet anomaly can be explained.     

Dielectric,thermal, and mechanical properties of CeO2‐filled HDPE composites for microwave substrate applications

Cerium oxide‐filled high density polyethylene (HDPE) composites for microwave substrate applications were prepared by sigma‐blend technique. The HDPE was used as the matrix and the dispersion of CeO₂ in the composite was varied up to 0.5 by volume fraction, and the dielectric properties were studied at 1 MHz and microwave frequencies. The variations of thermal conductivity (k_eff), coefficient of thermal expansion (α_c) and Vicker's microhardness with the volume fraction of the filler were also measured. The relative permittivity (ε_eff) and dielectric loss (tan δ) were found to increase with increase in CeO₂ content. For 0.4 volume fraction loading of the ceramic, the composite had ε_eff = 5.7, tan δ = 0.0068 (at 7 GHz), k_eff = 2.6 W/m °C, α_c = 98.5 ppm/°C, Vicker's microhardness of 18 kg/mm² and tensile strength of 14.6 MPa. Different theoretical approaches have been used to predict the effective permittivity, thermal conductivity, and coefficient of thermal expansion of composite systems and the results were compared with the experimental data. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 998–1008, 2010